Power supplies, Orcad Capture, alciro

User: alciro User

Original Translate to: Deutsch English Français 中文

Orcad Capture

Comunicaciones industriales

Documentación industrial

El código de caracteres ASCII

Los diodos LEDs

Microcontrolador ESP32

Microcontroladores 8051

Orcad Capture

Programación en C++ Builder

SCADA HMI

1. Graphic Elements

1.1. Components (Parts)
1.2. Wire (Wire)
1.3. Set of wires (buses)
1.4. Unions (Juctions)
1.5. (Power Objects)
1.6. Connection between sheets (Port Module)
1.7. Symbols sheet (Sheet Symbols)
1.8. Tags (Label)
1.9. No Connection (No Connection)
1.10. Text (Text)
1.11. Box (Title Block)
1.12. Parties on the elements

2. Design (Desing)

2.1. Redesigned (New Desing)
2.2. Design Manager

3. Place order items (place)

3.1. Place a component (place Part)
3.2. Editing a component

4. Create a library

4.1. Add an item (Part)

4.2. Component Editing

4.2.1. Component body
4.2.2. Pins (Pins)

5. PSpice simulation of circuits

5.1. Create a project for the simulation with PSpice

5.2. Create the schema with orcad capture CIS

5.2.1. Power supplies
5.2.2. Sine signal generator
5.2.3. Pulsatoria, square signal generator

5.3. Simulation with pspice

5.2.1. Power supplies

Operational amplifier feeding.

In the library SOURCE select and place the element VDC.
Edit the value with the 12V.
Connect the mass of reference to negative to the positive voltage of + 12V.
Connect the reference mass to the positive to the negative of - 12V voltage

Power object VDC/CAPSYM connecting one at each point of feeding and naming them is used to make the connection between the food of CC and the operational + 12V for positive feeding and -12V for the refusal, as shown in the next figure.

Sources of continuous voltage supply

Share |